Second-hand ONT ONU Factory Price EG8143A5 1GE+3FE+CATV Single Band Modem FTTH Solutions
Technical specifications
AI8143A5 GPON ONT Product Description
1. Product Overview
The AI8143A5 is an intelligent routing-type GPON Optical Network Terminal (ONT) designed for FTTH (Fiber-to-the-Home) and residential broadband scenarios. It integrates high-speed data, VoIP, 2.4GHz Wi-Fi, and CATV RF interfaces, delivering stable, multi-service ultra-broadband access for home users.
2. Key Features
2.1 GPON Standard & Performance
- Compliant with ITU-T G.984/G.988 GPON standards.
- Downlink rate: Up to 2.488 Gbps; Uplink rate: Up to 1.244 Gbps.
- Optical module: Class B+, SC/APC connector.
- Wavelength: Tx 1310 nm, Rx 1490 nm.
- Optical parameters: Receiver sensitivity –27 ~ –29 dBm; Overload power –8 dBm.
- Supports AES-128 encryption, DBA, bidirectional FEC, and Type B protection.
- Maximum transmission distance: 20 km over single-mode fiber.
2.2 Interfaces & Indicators
- Ethernet Ports: 1 × GE (10/100/1000M) + 3 × FE (10/100M) auto-sensing RJ45.
- Voice Port: 1 × FXS (POTS) port, supports SIP protocol.
- Wi-Fi: 2.4 GHz, IEEE 802.11b/g/n, 2×2 MIMO, up to 300 Mbps.
- CATV Port: 1 × RF port (54–870 MHz), 75 ohms.
- Buttons: WPS, WLAN, Reset.
- LED Indicators: POWER, PON, LOS, LAN, TEL, WLAN, WPS, CATV.
2.3 Service & Security
- Operating Modes: Bridge & NAT router (PPPoE, DHCP, Static IP).
- IPTV: IGMP v2/v3 snooping/proxy.
- QoS: 802.1p priority, WMM, port rate limiting.
- VLAN: 1:1, N:1, QinQ, transparent transmission
- Network: IPv4/IPv6 dual stack.
- Security: SPI firewall, MAC/IP filtering, anti-DoS/ARP attacks.
- Wi-Fi Security: WPA/WPA2/WEP, WPS, multiple SSIDs.
- Reliability: Lightning protection (Power: 6 kV, GE: 4 kV)
2.4 Management & Maintenance
- Remote Management: OMCI, TR-069.
- Local Management: Web GUI (default IP: 192.168.1.1).
- Firmware Upgrade: Remote/local via OLT or web.
- Installation: Desktop or wall-mounted.
3. Technical Specifications
| Parameter | Specification |
| PON Interface | 1 × GPON, SC/APC, Class B+ |
| LAN Ports | 1 × GE + 3 × FE |
| Voice | 1 × FXS (SIP), G.711/G.729/G.722 |
| Wi-Fi | 2.4 GHz, 802.11b/g/n, 2×2 MIMO, 300 Mbps |
| CATV | 54–870 MHz, 75Ω, RF output ≥17 dBmV/Ch |
| Power | Input: 100–240V AC; Output: 12V DC / 1A |
| Power Consumption | ≤ 8.2 W (max), ≤ 5.2 W (static) |
| Operating Temp | 0°C ~ +40°C |
| Humidity | 5% ~ 95% RH (non-condensing) |
| Dimensions | 34 × 175 × 115 mm |
| Weight | Approx. 235 g |
4. Application Scenarios
The AI8143A5 is widely used in FTTH networks to provide:
- High-speed Internet access
- VoIP telephone service
- HD IPTV/4K video streaming
- 2.4GHz Wi-Fi for home devices
- CATV RF signal reception
It serves as a cost-effective, all-in-one fiber gateway for reliable multi-service home broadband access.