Technical specifications
EFTL Service Board (for ZXA10 C600/C650 OLT)
Product Model: EFTL (16-port 10G EPON PR30 Service Board)
Compatible Platform: ZXA10 C600 / C650 / C620 OLT Chassis
Product Type: Carrier-grade 10G EPON (Symmetric PR30) Service Board
1. Product Overview
The EFTL is a high-density, carrier-grade 16-port symmetric 10G EPON service board designed for the ZXA10 C600/C650 series OLT platforms. It complies with IEEE 802.3av standard and uses PR30-class SFP optical modules to deliver 10G/10G symmetric transmission over single-mode fiber.The EFTL supports up to 2,048 subscriber ONUs (max 1:128 split per port), enabling ultra-broadband triple-play services (HSI, VoIP, IPTV), 5G mobile backhaul, and enterprise high-speed access. It features hot-swappable design, advanced security, and carrier-grade reliability for large-scale FTTH/FTTB networks.
2. Key Specifications
Basic Parameters
- PON Standard: IEEE 802.3av (10G EPON symmetric)
- PON Ports: 16 × 10G EPON SFP ports (PR30)
- Hot-Swappable: Yes (in-service replacement)
- MAC Address Table: 64K entries
- Power Consumption:
- Static: 5W
- Typical: 105W
- Max: 115W
- Dimensions (H×W×D): 393.1 × 23.9 × 214 mm
- Weight: Approx. 1.74 kg
- MTBF: > 100,000 hours
Optical Interface (PR30 Symmetric)
- Transmission Rate:
- Downstream: 10.3125 Gbps
- Upstream: 10.3125 Gbps
- Wavelength:
- 10G Tx: 1577 nm
- GE Tx: 1490 nm
- 10G Rx: 1270 nm
- GE Rx: 1310 nm
- Optical Output Power:
- 10G: +2.0 ~ +5.0 dBm
- GE: +3.0 ~ +7.0 dBm
- Receiver Sensitivity:
- 10G: -28 dBm @ BER 10⁻¹²
- GE: -29.78 dBm @ BER 10⁻¹²
- Optical Budget: 32 dB (PR30)
- Transmission Distance: Up to 20 km
- Split Ratio: Max 1:128 per port
- Connector: SC/PC
- Fiber Type: Single-mode fiber (SMF)
LED Indicators
- RUN (Green): Slow blink = normal; Solid = self-test OK; Off = fault
- ALM (Red): On = hardware fault; Blink = abnormal status
- PON Port (Yellow): LINK = on; ACT = blink; Off = no link
Environmental Specifications
- Operating Temperature: -25°C to +55°C
- Storage Temperature: -40°C to +70°C
- Humidity: 5%–95% (non-condensing)
- Altitude: Up to 4,000 m
- EMC: Complies with IEC 61000 & telecom standards
Protection & Reliability
- Over-voltage / under-voltage protection
- Over-current & short-circuit protection
- Surge/lightning protection (±6kV)
- ALS (Automatic Laser Shutdown)
- FEC (Forward Error Correction)
- Rogue ONU detection & isolation
- PON protection: Type B/C protection
- 1+1 power redundancy support
Management & Protocols
- Management: SNMP v1/v2c/v3, CLI, Web, ZTE EMS/NMS
- Firmware: In-service upgrade
- EPON Protocols: MPCP, OAM, DBA
- Security: AES-128 encryption, ONU authentication, ACL
- QoS: 802.1p, DSCP, traffic shaping, DBA
- Network: IPv4/IPv6, VLAN stacking, QinQ, IGMP
3. Core Features
- 16-port 10G Symmetric EPON: Full-duplex 10G/10G per port for ultra-high bandwidth.
- High-Density Design: 16 ports per board, supporting up to 2,048 ONUs.
- PR30 Long-Reach Modules: 20 km transmission, 32 dB optical budget.
- Carrier-Grade Security: AES-128 encryption, ONU auth, rogue ONU isolation.
- Advanced DBA: Dynamic bandwidth allocation for efficient traffic management.
- Hot-Swappable: Maintenance without OLT shutdown.
- Low Power & High Efficiency: Optimized power design (max 115W).
- Wide Compatibility: Works with C600/C650/C620 OLT chassis.
- Real-Time Diagnostics: Optical power, temperature, voltage monitoring.
- Multi-Service Support: Triple-play, 5G backhaul, enterprise access.
4. Typical Applications
- C600/C650 OLT 10G EPON service expansion
- Ultra-broadband FTTH/FTTB triple-play networks
- 5G mobile front-haul / mid-haul / backhaul
- High-density residential & enterprise access
- Campus, industrial, and metro fiber networks
- 4K/8K IPTV & OTT video delivery
- Cloud computing & high-speed data interconnection